Author: D'Ottavio, T.
Paper Title Page
MOPGF155 Design and Status for the Electron Lens Project at the Relativistic Heavy Ion Collider 1
 
  • J.P. Jamilkowski, Z. Altinbas, M.R. Costanzo, T. D'Ottavio, X. Gu, M. Harvey, P. K. Kankiya, R.J. Michnoff, T.A. Miller, S. Nemesure, T.C. Shrey
    BNL, Upton, Long Island, New York, USA
 
  Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
The Electron Lens upgrade project at the Relativistic Heavy Ion Collider (RHIC) has reached an operational status, whereby intense, pulsed or DC beams of electrons are generated in order to interact with the RHIC polarized proton beams in both the Blue and Yellow Rings at the 10 o'clock Interaction Region. Interactions between the electrons and protons are utilized to counteract the beam-beam effect that arises from the desired polarized proton collisions, which result in a higher RHIC luminosity. A complex system for operating the e-lens has been developed, including superconducting and non-superconducting magnet controls, instrumentation systems, a COTS-based Machine Protection System, custom Blue and Yellow e-lens timing systems for synchronizing the electron beam with the RHIC timing system, beam alignment software tools for maximizing electron-proton collisions, as well as complex user interfaces to support routine operation of the system. e-lens software and hardware design will be presented, as well as recent updates to the system that were required in order to meet changing system requirements in preparation for the first operational run of the system.
 
poster icon Poster MOPGF155 [1.826 MB]  
 
WEPGF036 Data Categorization And Storage Strategies At RHIC 1
 
  • S. Binello, K.A. Brown, T. D'Ottavio, R.A. Katz, J.S. Laster, J. Morris, J. Piacentino
    BNL, Upton, Long Island, New York, USA
 
  Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
This past year the Controls group within the Collider Accelerator Department at Brookhaven National Laboratory replaced the Network Attached Storage (NAS) system that is used to store software and data critical to the operation of the accelerators. The NAS also serves as the initial repository for all logged data. This purchase was used as an opportunity to categorize the data we store, and review and evaluate our storage strategies. This was done in the context of an existing policy that places no explicit limits on the amount of data that users can log, no limits on the amount of time that the data is retained at its original resolution, and that requires all logged data be available in real-time. This paper will describe how the data was categorized, and the various storage strategies used for each category.
 
poster icon Poster WEPGF036 [0.337 MB]  
 
WEPGF134 Applying Sophisticated Analytics to Accelerator Data at BNLs Collider-Accelerator Complex: Bridging to Repositories, Tools of Choice, and Applications 1
 
  • K.A. Brown, P. Chitnis, T. D'Ottavio, J. Morris, S. Nemesure, S. Perez, D.J. Thomas
    BNL, Upton, Long Island, New York, USA
 
  Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
Analysis of accelerator data has traditionally been done using custom tools, either developed locally or at other laboratories. The actual data repositories are openly available to all users, but it can take significant effort to mine the desired data, especially as the volume of these repositories increases to hundreds of terabytes or more. Much of the data analysis is done in real time when the data is being logged. However, sometimes users wish to apply improved algorithms, look for data correlations, or perform more sophisticated analysis. There is a wide spectrum of desired analytics for this small percentage of the problem domains. In order to address this tools have been built that allow users to efficiently pull data out of the repositories but it is then left up to them to post process that data. In recent years, the use of tools to bridge standard analysis systems, such as Matlab, R, or SciPy, to the controls data repositories, has been investigated. In this paper, the tools used to extract data from the repositories, tools used to bridge the repositories to standard analysis systems, and directions being considered for the future, will be discussed.
 
poster icon Poster WEPGF134 [2.709 MB]  
 
WEPGF135 Using the Vaadin Web Framework for Developing Rich Accelerator Controls User Interfaces 1
 
  • K.A. Brown, T. D'Ottavio, W. Fu, S. Nemesure
    BNL, Upton, Long Island, New York, USA
 
  Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy
Applications used for Collider-Accelerator Controls at Brookhaven National Laboratory typically run as console level programs on a Linux operating system. One essential requirement for accelerator controls applications is bidirectional synchronized IO data communication. Several new web frameworks (Vaadin, GXT, node.js, etc.) have made it possible to develop web based Accelerator Controls applications that provide all the features of console based UI applications that includes bidirectional IO. Web based applications give users flexibility by providing an architecture independent domain for running applications. Security is established by restricting access to users within the local network while not limiting this access strictly to Linux consoles. Additionally, the web framework provides the opportunity to develop mobile device applications that makes it convenient for users to access information while away from the office. This paper explores the feasibility of using the Vaadin web framework for developing UI applications for Collider-Accelerator controls at Brookhaven National Laboratory.
 
poster icon Poster WEPGF135 [0.986 MB]