Author: Fernandez, L.
Paper Title Page
WEPGF146 GUI Style Guide for Control System Applications at ESS 1
 
  • F. Amand, M. Pavleski, M. Pleško
    Cosylab, Ljubljana, Slovenia
  • L. Fernandez
    ESS, Lund, Sweden
 
  To help developers create consistent-looking control system application GUIs, the European Spallation Source Integrated Control Systems group asked Cosylab to develop a Style Guide document. Its purpose is to avoid that GUIs needlessly diverge and make the end-result of all screens combined look harmonious, even if GUIs have been developed over several years by many contributors. Also it will speed up development, by letting developers start from design patterns, rather than starting "from a blank page". The document defines a set of basic panel sizes, containing a 960px-style grid for consistent organization of content. It also defines color scheme and font usage, in-line with the overall ESS corporate communications manual, with the addition of signal colors. In addition it shows example screens to serve as GUI design patterns for typical screen types such as engineering screens, control applications and synoptic screens. It concludes by setting rules and recommendations for the usage of automation symbols and display of engineering and physical units. The document is further complemented by a separate document with Usability Guidelines for Human-Machine interfaces.  
poster icon Poster WEPGF146 [1.863 MB]  
 
FRB3O02 Status of the European Spallation Source Control System 1
 
  • T. Korhonen, R. Andersson, F. Bellorini, S.L. Birch, D.P. Brodrick, H. Carling, J. Cereijo García, R.N. Fernandes, L. Fernandez, B. Gallese, S.R. Gysin, E. Laface, N. Levchenko, M. Mansouri Sharifabad, R. Mudingay, A. Nordt, D. Paulic, D.P. Piso, K. Rathsman, M. Reščič, G. Trahern, M. Zaera-Sanz
    ESS, Lund, Sweden
  • N. Claesson, U. Rojec, K. Strniša, A.A. Söderqvist
    Cosylab, Ljubljana, Slovenia
 
  The European Spallation Source (ESS) is a collaboration of 17 European countries to build the world's most powerful neutron source for research. ESS has entered the construction phase and the plan is to produce first neutrons by 2019 and to complete the construction by 2025. The Integrated Control System Division (ICS) is responsible to provide control systems for the whole facility. The unprecented beam power of 5 MW and the construction of the facility with many components contributed in-kind presents a number of challenges to the control system. Systems have to be specified so that the work can be effectively shared between the contributors and on-site staff. Control system components need to provide a level of performance that can support the operation of the facility, be standardized so that integration to the facility can be done during a short installation period and be maintainable by the in-house staff after the construction has finished. This paper will outline the plans and principles that will be used to construct the control systems. The selected technologies and standards will be presented, as well as the plans for integration.