Author: Huang, C.H.
Paper Title Page
MOPGF008 Embedded Environment with EPICS Support for Control Applications 1
 
  • Y.-S. Cheng, K.T. Hsu, C.H. Huang, D. Lee, C.Y. Liao
    NSRRC, Hsinchu, Taiwan
 
  System on a chip (SoC) is widely used in embedded environment. Current generation SoC commercial products with small footprint and low-cost have powerful in CPU performance and rich interface solution to support many control applications. To deal with some embedded control applications, the "Banana Pi" which is a card-size single-board computer and runs Linux-based operation system has been adopted as the EPICS IOC to implement several applications. The efforts for implementing are summarized in this paper.  
poster icon Poster MOPGF008 [2.985 MB]  
 
MOPGF088 Integrating the Measuring System of Vibration and Beam Position Monitor to Study the Beam Stability 1
 
  • C.H. Huang, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, C.Y. Liao
    NSRRC, Hsinchu, Taiwan
 
  For a low emittance light source, beam orbit motion needs to be controlled within submicron for obtaining a high quality light. Magnets vibration especially quadruples will be one of the main sources to destroy the beam stability. In order to study the relationship between vibration and beam motion, it is highly desirable to use a synchronous data acquisition system which integrates measurement of vibration and beam position monitor systems especially for the coherence analysis. For a larger vibration such as earthquakes are also deleterious to beam stability or even make the beam trip due to the quench of superconducting RF cavity. A data acquisition system integrated with an earthquake detector is also quite necessary to show and archive the data on the control system. The data acquisition systems of vibration and earthquake measurement system are summarized in this report. The relationship between the beam motion and magnets vibration will also study here.  
poster icon Poster MOPGF088 [0.499 MB]  
 
WEPGF019 Database Applications Development of the TPS Control System 1
 
  • Y.-S. Cheng, Y.-T. Chang, J. Chen, P.C. Chiu, K.T. Hsu, C.H. Huang, C.Y. Liao
    NSRRC, Hsinchu, Taiwan
 
  The control system had been established for the new 3 GeV synchrotron light source (Taiwan Photon Source, TPS) which was successful to commission at December 2014. Various control system platforms with the EPICS framework had been implemented and commissioned. The relational database (RDB) has been set up for some of the TPS control system applications used. The EPICS data archive systems are necessary to be built to record various machine parameters and status information into the RDB for long time logging. The specific applications have been developed to analyze the archived data which retrieved from the RDB. One EPICS alarm system is necessary to be set up to monitor sub-system status and record detail information into the RDB if the problem happened. Some Web-based applications with RDB have been gradually created to show the TPS machine status related information. The efforts are described at this paper.  
poster icon Poster WEPGF019 [4.003 MB]  
 
FRB3O01 Commissioning of the TPS Control System 1
 
  • C.Y. Liao, Y.-T. Chang, J. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Huang, C.H. Kuo, D. Lee, C.-J. Wang, C.Y. Wu
    NSRRC, Hsinchu, Taiwan
 
  Con¬trol sys¬tem for the Tai¬wan Pho¬ton Source (TPS) has been completed in 2014. Com¬missioning of the accelerator system is in proceeding. Electron beam were stored at the stor¬age ring and emit first light in De¬cem¬ber 31, 2014. TPS con¬trol sys¬tem adopts EPICS toolk¬its as its frame¬works. The sub¬sys¬tems con¬trol in¬ter¬faces in¬clude event based tim¬ing sys¬tem, Eth¬er¬net based power sup¬ply con¬trol, cor¬rec¬tor power sup¬ply con¬trol, PLC-based pulse mag¬net power sup¬ply con¬trol and ma¬chine pro¬tec¬tion system, in¬ser¬tion de¬vices mo¬tion con¬trol sys¬tem, var¬i¬ous di¬ag¬nos¬tics re¬lated con¬trol en¬vi¬ron¬ment, and etc. The stan¬dard hard¬ware com¬po¬nents had been in¬stalled and inte¬grated, and the var¬i¬ous IOCs (Input Out¬put Con¬troller) had been im¬ple¬mented as var¬i¬ous sub¬sys¬tems con¬trol platforms. Low level and high level hard¬ware and software are tested in¬ten¬sively in 2014 and final re¬vise to pre¬pare for rou¬tine op¬er¬a¬tion is under way. Ef¬forts will be sum¬ma¬rized at this paper.