Author: Lindberg, M.
Paper Title Page
MOPGF065 Motion Control on the Max IV Soft X-Ray Beamlines With Tango and Sardana 1
  • M. Lindberg, J. Forsberg, L. Kjellsson, A.M. Milan, C. Sathe, P. Sjöblom, S. Urpelainen
    MAX-lab, Lund, Sweden
  MAX IV Laboratory, a synchrotron facility in Lund, has selected TANGO as the control system framework for the entire facility. On the beamlines that are being built the Python-based SCADA (supervisory control and data acquisition) system Sardana will be used for experimental control. SPECIES, one out of eight new soft X-ray beamlines, is used as a test bench for evaluating the chosen standards. Sardana is used to control the energy setting of the PGM (plane grating monochromator) as well as to provide macros and other utilities for the user. Generic Taurus GUIs and a SVG-synoptic give the user a way to interact with the control system and display relevant information. The standardized graphical interfaces give a familiar look and feel across the entire facility. All motorized axes are controlled with the IcePAP motion controller. For the axes of the PGM, the IcePAP driver operates in hardware closed loop. Special care is taken in order to avoid slow and inaccurate movements of the PGM energy due to the non-linear relationship between the motors and the angular encoders.  
poster icon Poster MOPGF065 [0.870 MB]  
MOPGF179 Status of the Solaris Control System - Collaborations and Technology 1
  • P.P. Goryl, C.J. Bocchetta, P. Bulira, A.I. Wawrzyniak, K. Wawrzyniak, Ł. Żytniak
    Solaris, Kraków, Poland
  • V.H. Hardion, J.J. Jamroz, J. Lidón-Simon, M. Lindberg, A.G. Persson, D.P. Spruce
    MAX-lab, Lund, Sweden
  • M.J. Stankiewicz
    Solaris National Synchrotron Radiation Centre, Jagiellonian University, Kraków, Poland
  • T. Szymocha
    Cyfronet, Kraków, Poland
  Funding: Work supported by the European Regional Development Fund within the frame of the Innovative Economy Operational Program: POIG.02.01.00-12-213/09.
The Solaris is a synchrotron light source starting just now in Kraków, Poland. It is built with strong collaboration with other European accelerator facilities. The MAX-IV project in Lund, Sweden and Tango Community are the most important partners in the project. Solaris has built a twin copy of MAX-IV 1.5GeV ring and linear accelerator based on the same components as the ones of MAX-IV. Thus, both facilities share know-how and apply similar technologies for the control system, among them the Tango CS is used for software layer. Status of the control system in Kraków as well as collaborations and technological choices impact on its success will be presented.
poster icon Poster MOPGF179 [2.496 MB]